Careful placement of the toilet ring is essential for the health of your family. Follow the directions provided below to set the toilet ring into the flange after tiling the .
Installing a new toilet, or resetting an old one, is often necessary when remodeling a bathroom. Although installing a toilet is an easy project, an uneven floor can .
You can't compensate for this much of a height difference with a thicker wax ring, so you'll probably need to raise the flange before you put the toilet back. It's not .
When all the tiles are in place and the thin-set has hardened, remove all the spacers. Next, raise the toilet flange by adding an extension ring or two (Photo 13). The extended flange should be flush with or higher than the surrounding tile. When you grout, fill in between the flange and tile.
Remove the toilet and turn it on its side. Measure the depth and width of the gluing edge of the bowl. Next, move your caulk gun to the inset depth you just measured and apply caulk directly to the floor, maintaining the inset depth as you follow the tape. Install the wax ring and lower the toilet onto the flange.