How to Fix a Leaky Toilet Tank. Water pooling around the bottom of a toilet may come from a variety of locations on the tank. Determine the location of the leak .
How to Fix a Leaky Toilet Tank. 1Turn off the water at the shutoff valve below the tank. 2Drain the tank completely. 3Hold one of the tank bolt nuts. 4Unscrew the tank bolts with the screwdriver. 5Remove the tank from the bowl and lay it down. 6Remove the old spud washer. 7Insert the new spud washer.
The repair plan for leaky toilet tanks depends on where the leak occurs.. The flapper is the device at the bottom of the tank that prevents water from flowing into .
Is your toilet leaking from between the tank and the bowl onto the floor? Water belongs in your toilet not on the floor, let's get that fixed.. STEP 2: Place a bucket underneath your toilet tank to catch any excess water. place bucket under toilet.
Turn off the water at the shutoff valve, flush the toilet and hold down the handle. There may be a little water left in the bottom of the tank, but don't worry about it. Wipe the flapper seat with a clean cloth to make sure it's free of debris, and check it for cracks or splits (Image 1).
If water is leaking from beneath the toilet, you might be able to stop it by simply tightening the closet bolts that secure the toilet to the floor. Use a putty knife or slotted screwdriver to pry off the caps that are covering the bolts. Then use a wrench to alternately tighten each bolt, a little at a time.